• 1/1
13525000476
產品詳情

Hydraulic tyre cutter

scrap tire crush machine plant for rubber powder is used to recycle waste tires into rubber powder in different sizes,get rid of steel wires and fiber from rubber powder. Our waste tire recycling machine plant can recycle both radial tire and nylon tire. Semi-automatic and fully automatic operation ways can be choose deponding on your requirement. The tire recycling line is mainly process diameter less than 1200mm truck tire into blocks and make it 1-5mm and 20-30 mesh rubber powder.



Technical Data

Model

Motor

(kw)

Processing range

(mm)

Weight

(kg)

Dimension

(mm)

Production

QDY7005.5750-1400
1500
1720*950*188015-20 pieces tire/hour


The structure and principle

This machine is composed of host machine, hydraulic station, electrical box, button box etc. Rack, moving knife, stationary knife, hydro-cylinder and some other supporting facilities comprise the host machine. Hydraulic pressure station consists of motor, oil pump, oil box, block and some pipes. Moving knife and rack are connected by spindle. When the machine is in operation, the moving knife is driven by hydro-cylinder and turns around the spindle to complete shearing action.



Operation step

(1)Inspect the equipment components

(2)Switch on the power switch, turn on the motor launch button (Check whether the motor change direction is right or wrong), making the machine run with no load for a period. (If the temperature is low, the time should be extended).

(3)Feeding shear, press the shear button to the correct position, and then press the return button.

Attention: When the machine is running, cleaning up the machine is forbidden. When the material is fell into the machine, the machine must be stopped and handle it immediately; May not arbitrarily turned the machine parts; The machine must be adjusted and repaired by the experienced technicians.


Safety warning:

Because the blades are outside the device, there is some danger. Please do it according to basic safety operation procedures. Manufacturer is not responsible for the improper using and other man-made accidents.