視頻
    視頻
  • 1/2
13525000476
產品詳情

Blocks cutter can also cut more strip materials like cables, ropes, etc. Contact us directly, you will get desirable equipment.

If you want cut waste tires,four tire cutting machines are available for you.They are ring cutter,strips cutter,blocks cutter and bead wire separator.


Principle:

The machine in used to cut the rubber strips into(3-8cm) rubber blocks.The transmission way of the machine is belt, the belt and motor making the machine operate. The cutting processing is formed by the two rotary blades and one fixed blade.


Technical Data


Model

power

(kw)

Processing rang
(mm)
Weight
(kg)
Dimension
(mm)
Production
(t/h)
     QK35030.75750-120015001100*1200*14902


Instructions for use

  • The machine is composed of two moving knives, one fixed knife and forced feeding mechanism. The moving cutter rotates and intersects with the fixed cutter to form shear, and all cutters have a certain angle. When changing the tool, pay attention to the angle of the original tool. The tool wear should be repaired immediately. Adjust the gap between the fixed tool and the moving tool (0.05 ~ 0.10mm). The gap between the two moving tools and the fixed tool should be consistent. It can be measured with a feeler gauge and checked frequently to prevent the moving tool from loosening and causing tool breaking accidents.

  • The cutter of this machine is made of cemented carbide. When changing the tool, oxygen brazing or furnace welding is required. When the tool body is worn more, it needs to be replaced. After welding the cutting tools, the edges of the two moving tools shall be aligned together and polished with a special grinding wheel for grinding cemented carbide. The height of the two tools must be the same, otherwise it will cause difficulties in connecting and cutting.

  • The teeth of the pressing part are made of special alloy, and the clearance between the teeth and the bottom must be greater than 3mm. The clearance shall be adjusted in time through nylon pillars at both ends. Shims can be added at the lower part of the pillar body to achieve the purpose of adjustment and increase the traction force

  • Due to certain vibration of the equipment, the electrical safety device cannot be installed on the machine. Before use, add electrical safety protection facilities on the external power supply. This machine has only a simple switch when leaving the factory.

Remarks: the cutter, cutter body and triangular belt are vulnerable parts and are not within the scope of quality guarantee.


The advantages of choose us

1.special manufacturer that has professional producing team and technical support.

2.top level sale teams to communicate with clients by email,telephone,face to face.

3.professional explanation to clients about machines.(techonogy,apply,using guide and so on)

4.more than 15 years of experience of exporting ability.