視頻
    視頻
  • 1/2
13525000476
產品詳情

Description

XYT machinery can customize to meet the needs of different customers. Strips cutter can also be used for process other materials.



Strips cutter is used to cut tire sidewalls and tread got from sidewalls cutter into tires strips.(strip width:30-100 mm,The blade is made of alloy steel and can cut 500 tons continuously. If it is polished once in 3-5 days, it can cut 2000 tons)


Structural principle

The reduction motor drives the two blades to run at a relatively uniform speed through the rotating mechanism. Promote the two blades to form a shear potential, place the material between the two blades and move forward to achieve the shear effect.



Technical Data

Model

Power

(kw)

Processing range

        (mm)

Diameter of round blades(mm)

Weight

   (kg)

    Dimension

        (mm)

Production

     (t/h)

QT3804750-1200380900
1320*750*15801




Instructions for use

1.   This machine is used for the treatment of 825 ~ 1200mm waste tires. Reasonably adjust the strip           width according to the actual situation of tires and adjust the bolts behind the baffle (note that the       inlet should be small and the outlet should be large along the feeding direction).


2.   The slitting tool is made of special materials with high hardness and good wear resistance. The               clearance between the upper and lower knives can be adjusted through the four groups of bolts on       the support. It should be noted that the inlet should be zero and the outlet should be slightly                 larger (the clearance is too tight, the tool wear is fast, the clearance is large, and it is difficult to cut.       During adjustment, it should be noted that the clearance can be cut off and should be adjusted             frequently). The upper and lower knives should be staggered by 1.5 ~ 3mm. If the tool is not sharp       after being used for a period of time, immediately grind the outer inclined edge with a grinder.